Home > Exhibition > Content

Hard-wearing Copper Bushing Centrifugal Casting

Mar 26, 2017
Copper Bushing Centrifugal Casting   Basic Info
  • Model NO.: casting part

  • Casting Form Material: Metal

  • Casting Form Usage Count: Permanent

  • Surface Roughness: Ra0.2

  • Machining Tolerance: +/-0.15mm

  • Surface Condition: Sand Blasting

  • Trade Mark: at OEM ODM

  • Shipping Port: Jiangsu

  • Origin: China

  • Casting Method: Sand Casting

  • Casting Metal: Cast Iron

  • Surface Treatment: Polishing

  • Coating: Water

  • Standard: AISI


Centrifugal Casting Parts

 Casting Procedure:
Centrifugal casting, sometimes called rotocasting, is a metal casting process that uses centrifugal force to form cylindrical parts. This differs from most metal casting processes, which use gravity or pressure to fill the mold. In centrifugal casting, a permanent mold made from steel, cast iron, or graphite is typically used. However, the use of expendable sand molds is also possible. The casting process is usually performed on a horizontal centrifugal casting machine (vertical machines are also available) and includes the following steps:
1. Mold preparation - The walls of a cylindrical mold are first coated with a refractory ceramic coating, which involves a few steps (application, rotation, drying, and baking). Once prepared and secured, the mold is rotated about its axis at high speeds (300-3000 RPM), typically around 1000 RPM.
2. Pouring - Molten metal is poured directly into the rotating mold, without the use of runners or a gating system. The centrifugal force drives the material towards the mold walls as the mold fills.
3. Cooling - With all of the molten metal in the mold, the mold remains spinning as the metal cools. Cooling begins quickly at the mold walls and proceeds inwards.
4. Casting removal - After the casting has cooled and solidified, the rotation is stopped and the casting can be removed.
5. Finishing - While the centrifugal force drives the dense metal to the mold walls, any less dense impurities or bubbles flow to the inner surface of the casting. As a result, secondary processes such as machining, grinding, or sand-blasting, are required to clean and smooth the inner diameter of the part.
Why choose centrifugal casting?
Centrifugal casting is used to produce axi-symmetric parts, such as cylinders or disks, which are typically hollow. Due to the high centrifugal forces, these parts have a very fine grain on the outer surface and possess mechanical properties approximately 30% greater than parts formed with static casting methods. These parts may be cast from ferrous metals such as low alloy steel, stainless steel, and iron, or from non-ferrous alloys such as aluminum, bronze, copper, magnesium, and nickel. Centrifugal casting is performed in wide variety of industries, including aerospace, industrial, marine, and power transmission. Typical parts include bearings, bushings, coils, cylinder liners, nozzles, pipes/tubes, pressure vessels, pulleys, rings, and wheels.
Company Information
 DMG has developed into a leading investment¢rifugal casting manufacturer in china. By partnering with us for your casting projects, you will benefit from the experience and capabilities of an industry leader. 

DMG offer a large variety of material selections, covering carbon steel, alloy steel, stainless steel, cast iron and ductile iron. “Value added”process is also available to fully meet your requirements, heat-treatment, Non-Destructive Test, Machining, Welding, Plating, Painting, Polishing and Assembly etc. 

Our typical products includes:refuse incinerator grate series which highly substitute for the foreign parts by absorbing the advanced technology; alloy centrifugal casting pipe series including radiant tubes, furnace hearth roller, galvanized furnace rollers, sink rollers, heat&wear resistant steel sleeves and so on, the range of the diameter for those pipes can figured from 50mm to 1500mm; Heat&wear resistant casting series like heat treatment furnace trays,racks,rails and other components.

Our company is an innovative partner that provides outstanding service, exceptional quality, and low costs - all within short lead times.Whether you require complex cast components , or your needs include high volume, rapid prototype or short run projects, you can count on the experience, innovation and dedication of us to work for you.



TEL: +8613382893387

FAX: +86-510-85308166

ADD: Wuxi New Area Shuofang industrial zone by six road No. 8

Email: sales@dmgzz.com